3M VHB Tape 5952
0.045 inch (1.1 mm) thick black double-coated acrylic foam tape designed for high-strength bonding across a wide range of substrates.
Product Overview
3M VHB Tape 5952 is a high-performance acrylic foam tape with a PE film liner. It features modified acrylic adhesive on both sides, providing strong adhesion to high, medium, and medium/low surface energy substrates, including metals, glass, plastics, and many powder-coated paints. The conformable foam allows good contact even when substrates are slightly mismatched, ensuring reliable bonding in various applications bannerups.com+1.
Physical and Mechanical Properties
- Thickness: 0.045 inch (1.1 mm)
- Color: Black (also available in white)
- Liner: PE film
- Tape Width: Typically 12.7 mm (0.5 in) or customizable
- Length: Up to 33 meters per roll
- Viscoelastic Behavior: Strength and stiffness depend on the rate of applied stress; stronger under faster dynamic loads and exhibits creep under long-term static loads strouse.com.
Temperature and Load Performance
- Operating Temperature Range: -250°C to 121°C (continuous exposure)
- Static Shear: Supports at least 250 g per 0.5 in² (3.23 cm²) for 10,000 minutes (~7 days) under indicated conditions
- Application Temperature: Recommended 21°C to 38°C (70°F to 100°F) for optimal adhesion; substrates and tape should be conditioned above minimum temperature to ensure proper bonding bannerups.com+1.
Application Guidelines
- Surface Preparation: Clean and dry surfaces improve adhesion; ensure substrates are free of oils, dust, or contaminants.
- Pressure: Apply firm pressure (~100 kPa / 15 psi) using a roller or platen to maximize adhesive contact. Additional pressure may be required for rigid parts 3M+1.
- Design Considerations: For static loads, approximately 4 in² of tape per pound (57 cm² per kg) of supported weight is recommended. For dynamic loads, a design factor of 12 lb/in² (85 kPa) is suggested strouse.com.
Chemical and Regulatory Information
- TSCA Compliance: Defined as an article under the Toxic Substances Control Act, exempt from inventory listing requirements
- Warranty: 3M provides limited warranty covering defective products; performance depends on proper application and environmental conditions 3M.
Summary
3M VHB Tape 5952 is ideal for high-strength, durable bonding in industrial and manufacturing applications, particularly where powder-coated paints, metals, and plastics are involved. Its conformable foam and modified acrylic adhesive ensure reliable adhesion across a variety of substrates, with excellent temperature and load performance when applied according to recommended guidelines bannerups.com+2.
For the full technical data sheet, refer to the official 3M PDF: 3M VHB Tape 5952 TDS